VitalWear Hot and Cold VitalWrap Therapy System VIT-00013 - Wraps Sold Separately

How the VitalWrap System works

This system is designed for both Hot and Cold therapy. One of the best features of this system is how you can switch back and forth from warm to cold and vice versa without having to change the water. If you would like cold and warm therapy, fill the unit up with cold water and ice. After using the cold therapy, simply change the dial to the desired temperature and within 1 minute, the system will provide warm therapy at the desired temperature. You can then switch back to cold therapy and within 1 minute the system will provide the cold therapy.  You can continue to switch back and forth between warm and cold therapy as desired.

The VitalWrap System consists of three components: a control unit, a tubing set, and a thermal fabric wrap. The control unit, which includes a fluid reservoir, manages the temperature of water used by the system to supply heat or cold to the fabric wrap attached to the body. By pumping the water through a heat-exchanging bladder inside the wrap, the control unit warms or cools the water to match the proper temperature setting, delivering precise and safe thermal therapy. 

Once the control unit is turned on, the cooled or warmed fluid is passed through the tubing set to the wrap. As it circulates into the wrap from the control unit, the fluid either applies heat to warm the treatment area or draws it away for deep cooling. The fluid then flows back into the control unit, where it is re-cooled or re-warmed before cycling back into the wrap.

The VitalWrap System is designed so that the user can apply thermal therapy for extended periods. The typical transition time between the warm and cold settings in the temperature range is about one minute.

Specially tailored wraps are available for any area of the body. 

Setting up the VitalWear System